[oclug]Digicam connection for upload--help please

[Rod Giffin]

GR... Do you have a SanDisk?  I use a SanDisk SDDR-31 with 32Mb flash
memory cards.  Its driver is /dev/sda1  OS is Mandrake 9.0

All you have to do is plug the SanDisk into your USB slot, insert a
flash memory card and mount /dev/sda1 to whatever mount point you
choose... In my case, /mnt/cfd (eg, mount /dev/sda1 /mnt/cfd)  The
pictures from your digital camera will appear in a subdirectory inside
the mount point.

Rod.

On Wed, 2002-11-27 at 19:49, Brad Barnett wrote:
> 
> 
> Doesn't look good :(  It may be supported in the future though, that's all
> I can say....
> 
> 
> On Wed, 27 Nov 2002 19:27:40 -0500
> GR Gaudreau <transop at sympatico.ca> wrote:
> 
> > On Wed, 27 Nov 2002 18:52:37 -0500
> > thus spake Brad Barnett <bb at L8R.net>:
> > 
> > > > [gr]  Nope, those were all the entries in /var/log/messages when I
> > > 
> > > Try looking in all logs ;P  Check /var/log/kern.log, syslog, etc.
> >  
> > [gr]  OK, here's what /var/log/kernel/warnings says:
> > 
> > Nov 27 17:12:05 www kernel: usb.c: USB device 2 (vend/prod 0x839/0x4)
> > is not claimed by any active driver.
> > 
> > And now  /var/log/kernel/errors:
> > 
> > Nov 27 18:06:31 www kernel: hub.c: connect-debounce failed, port 1
> > disabled
> > 
> > And last, /var/log/kernel/info
> > 
> > Nov 27 18:06:33 www kernel: hub.c: USB new device connect on bus2/1,
> > assigned device number 2 
> > Nov 27 18:06:36 www kernel: Initializing USB Mass Storage driver... 
> > Nov 27 18:06:36 www kernel: usb.c: registered new driver usb-storage 
> > Nov 27 18:06:36 www kernel: scsi1 : SCSI emulation for USB Mass
> > Storage devices Nov 27 18:16:26 www kernel:usb.c: USB disconnect on
> > device 2
> > 
> > Now for /var/syslog:
> > 
> > Nov 27 18:06:31 www kernel: hub.c: connect-debounce failed, port 1
> > disabled 
> > Nov 27 18:06:33 www kernel: hub.c: USB new device connect on
> > bus2/1, assigned device number 2 
> > Nov 27 18:06:33 www kernel: usb.c:
> > USB device 2 (vend/prod 0x839/0x4) is not claimed by any active
> > driver. 
> > Nov 27 18:06:36 www /etc/hotplug/usb.agent: Setup usb-storage
> > for USB product 839/4/0 
> > Nov 27 18:06:36 www kernel: Initializing USB Mass Storage driver... 
> > Nov 27 18:06:36 www kernel: usb.c: registered new driver usb-storage 
> > Nov 27 18:06:36 www kernel: scsi1 : SCSI emulation for USB Mass
> > Storage devices Nov 27 18:11:46 www kernel: resize_dma_pool: unknown
> > device type -1 
> > Nov 27 18:16:26 www kernel:usb.c: USB disconnect on device 2 
> > 
> > <snip the rest>
> > 
> > [gr]   I'll try your other suggestions below, Rod. Thanks. BTW,
> > couldn't find the kern.log file you mentioned.
> > 
> > 
> > _______________________________________________
> > oclug mailing list
> > oclug at lists.oclug.on.ca
> > http://www.oclug.on.ca/mailman/listinfo/oclug
> > 
> _______________________________________________
> oclug mailing list
> oclug at lists.oclug.on.ca
> http://www.oclug.on.ca/mailman/listinfo/oclug