[oclug] help with rogers!

[Collin McCrank]

I had a similar problem.  I think it had to do with pump.  What I had to do is
install dhcpcd and use it to obtain my new settings in Linux.

I suggest that you read the man pages on dhcpcd then give it a try.

-Collin


>
> On 01-Mar-2001 Michael P. Soulier wrote:
> >     Ok, I'm really confused.
> >
> >     My old network settings with rogers were:
> >
> > IP: 24.43.42.96
> > MK: 255.255.255.0
> > GW: 24.43.42.1
> >
> >     Now, they've changed my IP address, and my new settings are
> >
> > IP: 24.114.127.148
> > MK: 255.255.255.192
> > GW: 24.114.127.129
> >
> >     Unfortunately, while the old settings still work, the new ones don't.
> > They
> > work from my wife's NT box, but no matter what I do, I can't get them working
> > from my Linux box.
> >
> >     Help!
> >
> >     Mike
> >
> > --
> > Michael P. Soulier <msoulier at storm.ca>
> > "With sufficient thrust, pigs fly just fine. However, this is not necessarily
> > a good idea. It is hard to be sure where they are going to land, and it could
> > be  dangerous sitting under them as they fly overhead." -- RFC 1925
> > _______________________________________________
> > oclug mailing list
> > oclug at lists.oclug.on.ca
> > http://www.oclug.on.ca/mailman/listinfo/oclug
>
> ---
>
>                                      Dynamic Hosting
>                                    HTTP://www.L8R.net/
>                       "We Provide Static Hostnames for Dynamic IP's"
> _______________________________________________
> oclug mailing list
> oclug at lists.oclug.on.ca
> http://www.oclug.on.ca/mailman/listinfo/oclug
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cmccrank.vcf
Type: text/x-vcard
Size: 333 bytes
Desc: Card for Collin McCrank
Url : http://tux.oclug.on.ca/pipermail/oclug/attachments/20010301/c51133e7/cmccrank.vcf