[oclug] pppd error

[Richard Wayne]

I believe your username should be 'chris'. Leave the '@myisp.com' part out
of it. Also, I think the passive option is only used for dial-ins and I am
assuming you are trying to dial out.

Rich

----- Original Message -----
From: Chris Charland <chris at echelon.ca>
To: <oclug at lists.oclug.on.ca>
Sent: Wednesday, January 24, 2001 10:12 PM
Subject: [oclug] pppd error


> Hi, when i try to connect with slackware 7.1 kernell 2.2.16
>
> I get to following error output
>
> AT&FH0
> OK
> atdt3502243
> CONNECT
> Serial connection established.
> Using interface ppp0
> Connect: ppp0 <--> /dev/ttyS0
> sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xcdbc445e> <pcomp>
<accomp>]
> rcvd [LCP ConfReq id=0xe6 <asyncmap 0xa0000> <auth pap> <magic 0xb8dcc7e9>
> <pcomp> <accomp> < 11 04 05 f4> < 13 0f 01 62 65 6c 6f 74 77 63 6e 61 73
31
> 30>]
> sent [LCP ConfRej id=0xe6 <auth pap> < 11 04 05 f4> < 13 0f 01 62 65 6c 6f
> 74 77 63 6e 61 73 31 30>]
> rcvd [LCP ConfReq id=0xe7 <asyncmap 0xa0000> <auth pap> <magic 0xb8dcc7e9>
> <pcomp> <accomp>]
> sent [LCP ConfRej id=0xe7 <auth pap>]
> rcvd [LCP ConfReq id=0xe8 <asyncmap 0xa0000> <auth pap> <magic 0xb8dcc7e9>
> <pcomp> <accomp>]
> sent [LCP ConfRej id=0xe8 <auth pap>]
> rcvd [LCP ConfReq id=0xe9 <asyncmap 0xa0000> <auth pap> <magic 0xb8dcc7e9>
> <pcomp> <accomp>]
> sent [LCP ConfRej id=0xe9 <auth pap>]
> rcvd [LCP ConfReq id=0xea <asyncmap 0xa0000> <auth pap> <magic 0xb8dcc7e9>
> <pcomp> <accomp>]
> sent [LCP ConfRej id=0xea <auth pap>]
> rcvd [LCP TermReq id=0xeb]
> sent [LCP TermAck id=0xeb]
> sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xcdbc445e> <pcomp>
<accomp>]
> rcvd [LCP ConfReq id=0xec <asyncmap 0xa0000> <auth pap> <magic 0xb8dcc7e9>
> <pcomp> <accomp>]
> sent [LCP ConfRej id=0xec <auth pap>]
> Modem hangup
> Connection terminated.
> ---------
> My scripts are as follows
>
> # PAP authentication file: /etc/ppp/pap-secrets
> # This file should have a permission of 600.
> # ~# chmod 600 /etc/ppp/pap-secrets
> # Username      Server      Password      IP addresses
> chris at myIsp.com   *   "MyPassword"
>
> ---------
> TIMEOUT 60
> ABORT ERROR
> ABORT BUSY
> ABORT "NO CARRIER"
> ABORT "NO DIALTONE"
> "" "AT&FH0"
> OK "atdt223-2451"
> TIMEOUT 75
> CONNECT
> ----------
> # General configuration options for PPPD:
> lock
> #defaultroute
> noipdefault
> modem
> /dev/ttyS0
> 38400
> crtscts
> # Uncomment the line below for more verbose error reporting:
> debug
> # If you have a default route already, pppd may require the other side
> # to authenticate itself, which most ISPs will not do.  To work around
this,
> # uncomment the line below.  Note that this may have negative side effects
> # on system security if you allow PPP dialins.  See the docs in
> /usr/doc/ppp*
> # for more information.
> noauth
> passive
> asyncmap 0
> #nomagic
> name chris at myIsp.com
>
> ------------------
>
> Any Ideas??????????
> Thanks in Advance,
> Chris
>
>
>
>
>
> _______________________________________________
> oclug mailing list
> oclug at lists.oclug.on.ca
> http://www.oclug.on.ca/mailman/listinfo/oclug
>